Yellow phosphorus tail gas purification and CO purification technology to eliminate pollution

The Southwest Research Institute of Chemical Industry developed the technology of "purification and purification of carbon monoxide from yellow phosphorus tail gas" in 2003. The technical installation of the yellow phosphorus tail gas purification and purification of carbon monoxide at the Yellow Phosphorus Plant of Sichuan Linchen Group's 50 m3/h plant was adopted. In October 2004, he drove successfully. After testing, the content of phosphide, sulfide, arsenide, and fluoride in the purified yellow phosphorus tail gas is less than 1×10-6 kg/m3, and the carbon monoxide recovery rate is more than 85%.

Phosphorus is an important chemical raw material. The tail gas produced in the production process contains 85% to 90% of carbon monoxide as a basic carbonyl synthesis material, and also contains elements or compounds such as sulfur, phosphorus, arsenic, and fluorine. At present, most of the yellow phosphorus producers in China deal with yellow phosphorus tailings directly through the torch burning and venting, so that the surrounding atmospheric environment and water resources are contaminated, while carbon monoxide resources are wasted. According to the calculation of annual output of 450,000 tons of yellow phosphorus in China, a total of 1.1 billion standard cubic meters of yellow phosphorus tail gas will be produced each year. With 1.5 g of phosphorus and phosphides per standard cubic meter and 20 g of sulfides, 1687.5 tons of phosphide and 22,000 tons of sulfide are discharged into the atmosphere each year, causing serious environmental pollution and at the same time causing 990 million standard cubic meters. The above carbon monoxide resources are wasted.

Industry experts pointed out that the yellow phosphorus tail gas purification and carbon monoxide purification technology developed by the Southwest Institute will bring new technical support for China's environmental protection industry and meet the technical requirements for the development of circular economy.

Wind Power Crane

The main power parts, hydraulic parts and electrical parts of Tower Crane are imported brands, which fully meet the safety standards of European and American industries and ensure safe, stable and efficient operation;It has multiple security protection functions, which makes the operation safer and more convenient;
With the intelligent one button extension / retraction, the whole vehicle can be disassembled and disassembled in a shorter time, and it can reach the working state quickly; the short-distance transfer is convenient and efficient

Large Wind Power Generation Tower,Large Wind Power Crane,Wind Power Lifting,Large-Scale Luffing Tower Crane

Jinan Shanghangda Machinery Co., Ltd. , https://www.jnwoodmachine.com