RongNa has more than 10 years experience manufacturing custom machining and precision parts for diverse regional and national partners. Our working team uses the latest in CNC machining machine
How Does 5-axis CNC MILLING WORK?
Cnc Machining,Custom Cnc Machining,Cnc Machining Service,Cnc Metal Machining Ningbo Rongna Technology Co.,Ltd , https://www.prototyping-machining.com
We offer advanced 5-axis and 3-axis machining services that significantly increase the range of possibilities for working with complex surfaces and creating parts in numerous shapes and sizes. We provide custom Cnc Milling service and 3-axis, 5-axis CNC milling parts
Milling is the process of cutting and drilling material using a rotating cylindrical tool. This tool is held in a spindle and comes in a variety of sizes and forms. With 5-axis machining, there have two extra rotary axes defined by A, which rotates around the X axis, B, which rotates around the Y axis, and C, which rotates around the Z axis. The combination of additional axes depends on the machine and comes in variations, including AB, AC, or BC.
With 5-axis machining, the table or cutting tool can be tilted, creating the ability to avoid collision with the tool holder and allowing for better access to part geometry. This also ensures improved tool life and cycle time as it helps maintain cutting position and constant chip load. This type of machining offers a push toward single-setup machining, creating shorter lead times and increasing efficiency.
CNC milling is complex machining technique which utilizes several types of pre-programmed CAM and CNC controls to build customized components or parts. We are professional custom CNC milling company and 5 Axis CNC Milling Service provider in China, we offer the manufacturing of precision machined parts and solutions at affordable rates to meet the growing demands of the clients across the world.
We have several machining centers for creating complicated shapes or parts for your products. Contact for more.
Still & Box at 12300 S. Michigan Ave. 2-21-2013
This is a report from Dennis McGuire, Jr.:
This afternoon, Engine Co. 62 arrived at a one-story auto repair shop on fire with flames coming through the roof. Once the crews entered the building, the 22nd Battalion requested a "Still and Box" alarm. The fire was quickly brought under control, but there was significant overhaul and salvage work needed after the flames were extinguished.
Here are some photos from the scene:
[Image: Crews working on overhaul. Dennis McGuire, Jr. photo]
[Image: Engine Co. 115 in Sector 4, which was a large vacant lot. Dennis McGuire, Jr. photo]
[Image: Tower Ladder 34 staged in Sector 1 in case they needed to use the tower. Dennis McGuire, Jr. photo]
[Image: Truck Co. 62 (in a spare) with the aerial fully extended over a storage area to gain access to the roof. Dennis McGuire, Jr. photo]
[Image: Field Chief 4-5-6 in a new buggy Shop# B-560. Dennis McGuire, Jr. photo]
[Image: Field Chief 4-5-8 in a new buggy Shop# B-561. Dennis McGuire, Jr. photo]
[Image: The corner of Sector 4 & 1 while crews were doing overhaul. Dennis McGuire, Jr. photo]
From Dan McInerney:
Here are some pictures from the still and box at 12300 S. Michigan on Thursday afternoon. The fire occurred in a one-story vacant autobody shop. It appears the fire started in the garage and spread into the cockloft, eventually going through the roof. Squad 5 was on a still in a high-rise on 41st Street, and since the 22nd didn’t have an elevated stream on the still, they boxed it to bring in a tower ladder. Engine 115 and Engine 75 each had a 2.5-inch line and worked quickly to knock down the fire. Neither Tower 34 nor Squad 5 (who eventually arrived from 41st Street) used their platforms. There was a lot of overhaul afterward, and the 22nd Battalion requested EFAO to inform the Building Department that this was a vacant and open building.
[Image: Chicago Battalion 24. Dan McInerney photo]
[Image: Exterior on the Michigan side showing some overhaul performed. Dan McInerney photo]
[Image: Chicago FD Truck 24. Dan McInerney photo]
[Image: Chicago Battalion 21. Dan McInerney photo]
[Image: Sector 2 showing bay doors opened up and more roof overhaul. Dan McInerney photo]
[Image: Chicago FD Engine 75. Dan McInerney photo]
[Image: E75 with a line off (and it’s properly tied off). Dan McInerney photo]
[Image: Dan McInerney photo]
[Image: Chicago Engine 115. Dan McInerney photo]
[Image: Truck 27 was RIT. Dan McInerney photo]
[Image: Overhaul from above and below. Dan McInerney photo]
[Image: Dan McInerney photo]