Dongfeng Duolika dining car configuration detailed

The Dongfeng Doolika dining car is designed and developed to meet the market demand. The appearance of the vehicle is simple and atmospheric. The internal equipment of the car body is rationally placed to save space and make your mobile kitchen more practical. The dining car is suitable for rural weddings and funerals, urban crowded office buildings, development zones, factories, schools, military and other places where meals are concentrated. It can supply more than 600 people within half an hour, suitable for diversified businesses and individual mobile dining.

东风小多利卡餐车.5

Chassis configuration description:

Dongfeng Dolika white front turn cabin, Chao Chai 100 hp engine (four national emissions), five gear transmission, 7.00-16 tires, air brake with direction power.

Car body configuration introduction:

Car body size: 5.4 meters long, 2 meters wide, 2 meters high; the material of the car body is: double car plate, the outer car plate is high-strength glass fiber reinforced plastic, the inner car plate is stainless steel plate, and the interlayer is highly flame-retardant material rock wool. Car body thickness 5 cm. The right side wall panel is divided into three parts to form a sun visor and window sill; the interior of the cabin is equipped with a complete set of kitchen equipment: rice cooker, double stove, freezer, stainless steel dish rack, cabinets, console, hand basin, stainless steel water tank, sewage Box; The vehicle line is safely modified and equipped with an external power cord.

东风小多利卡餐车

东风小多利卡餐车.7

东风小多利卡餐车.6

东风小多利卡餐车.2

Vehicle parameter table:

【The main technical parameters】

Manufacturer

Hubei Junhao Special Vehicle Company

Contact information

13135738222 Manager Chen

product name

dining car

Product number

HCQ5040XCCDFA dining car

Total mass (Kg)

4495

Tank volume (m3)

Rated load quality (Kg)

Overall size (mm)

5995×2090×3300

Service quality (Kg)

4365,4300

Carriage size (mm)

× ×

Rated passenger (person)

The total weight of quasi trailers (Kg)

Number of riders in the cab (person)

2,3

Load quality utilization factor

Approach / departure angle)

19/15

Front suspension/rear suspension (mm)

1032/1663

Number of axes

2

Wheelbase (mm)

3300

Axis load (Kg)

1800/2695

High speed (Km/h)

95

other

Remarks: 1. The top of the compartment is closed and cannot be opened. 2. The new front cover, front bumper, and front combination lamp are optional with the chassis. The front foglight of the front bumper is optional; 3. Both side protection and rear protection are For the skirt structure, the height of the rear protection from the ground is 490mm.

[chassis technical parameters]

Chassis model

DFA1041SJ35D6

Chassis name

Car chassis

Trade name

Dongfeng Brand

manufacturer

Dongfeng Motor Co., Ltd.

Overall size (mm)

5845×1900, 1950×2220

Number of tires

6

Approach / departure angle)

19/16

Tire specifications

7.00-16 8PR, 7.00R16 8PR, 6.50-16 10PR, 6.50R16 10PR

Number of leaf springs

8/9+5,6/8+4,6/6+5

Front track (mm)

1506,1404,1500,1586

Fuel type

Diesel

Rear track (mm)

1466,1458,1520,1530

Emission Standards

GB3847-2005, GB17691-2005 State IV

engine model

Engine manufacturer

Displacement (ml)

Power (Kw)

4B28BTCI

SD4BW754U

YN33CRD2

CY4102-CE4F

YC4FA90-40

D28D10-4DA

CY4T75-CE4

4F20ATCI

4DW93-84E4

YN27CRD1

4DW93-95E4

Changchai Company Limited

Jiangsu Sida Power Machinery Group Co., Ltd.

Kunming Yunnei Power Co., Ltd.

Dongfeng Chaoyang Chaochai Power Co., Ltd.

Guangxi Yuchai Machinery Co., Ltd.

Dongfeng Light Engine Co., Ltd.

Dongfeng Chaoyang Chaochai Power Co., Ltd.

Changchai Company Limited

FAW Jiefang Automobile Co., Ltd. Wuxi Diesel Engine Factory

Kunming Yunnei Power Co., Ltd.

FAW Jiefang Automobile Co., Ltd. Wuxi Diesel Engine Factory

2834

2545

3298

3856

2982

2771

3707

1995

2540

2672

2540

70

75

75

73

66

75

75

60

64

70

72

Dongfeng Dolika after-sales service:

Chassis parts can be repaired at the service station nearest to the user's location (see Service Manual). Distribution location, technical strength, and contact details are detailed in the chassis "Maintenance Manual". For the repair of the special equipment for the upper equipment, telephone and fax contact information can be used. The supplier will send professional maintenance personnel to solve the problem after 24-28 hours.

Free maintenance plan and time limit: The "Three Guarantees" period provided by the supplier is one year or 30,000 km. During the "Three Guarantees" period, the free maintenance of the chassis part is performed at the service station where the user is located, and the free dedicated part is free. Maintenance is sent by the supplier to professional technicians. In case of quality failure due to improper operation, improper use, accident, etc., the supplier shall provide timely maintenance service, but the maintenance cost shall be borne by the user. For more information, please visit our company website: http://

3D Fiber Laser Marking Machine


VMADE-3D series 3D Laser Marking Machine adopts imported core components, it is equipped with high-speed, high precision 3D galvo scanner, and our self-developed 3D specified software and control system. These high-quality configurations ensure the system can make ultra-fine processing on any curved surface parts.


Feature

1,The machine will not deviate the focal point when working, it can real-time trace the deep-curved focuses. This makes the machines` efficiency and performance much better than the traditional 2D Fiber Laser Marking Machine. It totally breaks the traditional 2D marking model. The machine open up a new mode of 3D marking on oblique planes, segment gaps, cylinders, circular cones, spherical surfaces and extruded surfaces. 

2. The 3D machine perfectly realizes laser marking on work-pieces exactly the same as graphics, effectively avoiding deformation like stretch or slope. 

3. It makes the engraved patterns more closed to the original graphics, even the border can be marked perfectly, and the marking on each place of work-piece is very even and clear.

4. The software of the 3D laser machine is powerful, it can import various kinds of graphics format of mainstream 3D design software. The software itself can edit some simple 3D graphics, and it has the function of transforming 2D graphics into 3D ones, the operation is very easy. 


3D_Fiber_laser_Marking Machine

Feedback

Once you have received your item, please leave feedback for us as this will inform us that you have received your items.

Your positive feedback and 5 Star ratings: after you receive your order, we will give you a positive feedback.

Before give Neutral or negative feedback : pls contact us immediately,so that we can satisfactorily address your concerns

3D Fiber Laser Marker

Fiber Laser Marking Machine,3D Fiber Laser Marking Machine,Metal 3D Fiber Laser Marker,3D Fiber Laser Marker

Jinan Vmade CNC Machine Co.,Ltd , https://www.vmadecnc.com