*Â Using the Germany champion's disc technique vertical cutting platform, working width 2.4meters
Â
* Â The engine by Yuchai engine, output power of 190 horsepower, reliable quality, fuel consumption is small;
Â
*Â Free switching between 4WD walking and 2WD walking modes, improve the machine environment adaptability.
Â
*Â Adopt the operating system of electro-hydraulic control and CVT, electronic header, which is convenient for driver to operate;
Â
*Â Cast spout is in the way of rotating turbine, can be controlled wirelessly and remotely by handle;
Â
*Â Large capacity dump hopper, easy for the car-following operation;
Â
*Â Adjust the cutting length of the materials in multi-polar.The unique grain crushing and scrubbing device, straw rubbing rate is more than 95%, grain crushing rate is more than 90%.Â
Main Technical Parameter:
Â
| Items | Parameters |
| Operation way | Auto-run unlevel harvest |
| Cutting table type | vertical cylinder |
| Operation Range | 2400mm |
| Operation speed | 4-8km/h |
| Efficiency | 20-60T/h |
| Cutting Length | 7-50mm(adjustable) |
| Loss rate | ≤3% |
| Min cutting height | ≤150 |
| Engine Power | 140kw(190hp) |
| Dimension | 7100*2850*4730mm |
| Overall weight | 6900kg |
 Features:
*Â Using the Germany champion's disc technique vertical cutting platform, working width 2.4meters
Â
* Â The engine by Yuchai engine, output power of 190 horsepower, reliable quality, fuel consumption is small;
Â
*Â Free switching between 4WD walking and 2WD walking modes, improve the machine environment adaptability.
Â
*Â Adopt the operating system of electro-hydraulic control and CVT, electronic header, which is convenient for driver to operate;
Â
*Â Cast spout is in the way of rotating turbine, can be controlled wirelessly and remotely by handle;
Â
*Â Large capacity dump hopper, easy for the car-following operation;
Â
*Â Adjust the cutting length of the materials in multi-polar.The unique grain crushing and scrubbing device, straw rubbing rate is more than 95%, grain crushing rate is more than 90%.Â
Main Technical Parameter:
Â
| Items | Parameters |
| Operation way | Auto-run unlevel harvest |
| Cutting table type | vertical cylinder |
| Operation Range | 2400mm |
| Operation speed | 4-8km/h |
| Efficiency | 20-60T/h |
| Cutting Length | 7-50mm(adjustable) |
| Loss rate | ≤3% |
| Min cutting height | ≤150 |
| Engine Power | 140kw(190hp) |
| Dimension | 7100*2850*4730mm |
| Overall weight | 6900kg |
Â
PC bar Button Heading Machine
This product is a special equipment for the hot button heading of steel bars in the Spun Pile industry. The machine body adopts a new integrated supercharger cylinder with simple structure, double speed and enhanced function. The loss rate of the finished product is low, the external dimension is beautiful standard. The core parts of heating are designed with eccentric rotation, high utilization rate and small consumption of spare parts. The electronic control system adopts the new design of the automatic controller, a key switch, the operation is simple, the failure rate is low. This product is mature and stable, with strong anti-jamming performance and long service life.
The technical parameters:
|
No. |
Item |
Specification |
|
1 |
air source |
MAX7.2kg∕cm² |
|
2 |
Input voltage |
Three phase,four wire,AC380V±5%,50Hz |
|
3 |
Max capacity |
15KVA |
|
4 |
Max clamp |
air pressure 7.2kg∕cm²,50T |
|
5 |
Max capacity of heading |
air pressure 7.2kg∕cm²,16T |
|
6 |
Loss of reinforcement strength in heading |
＜5% |
|
7 |
Maximum heat current |
about 5500A |
|
8 |
Button heading steel bar dia. |
ø7.1,ø9.0,ø10.7,ø12.6 |
|
9 |
Machine size |
L×W×H=1250×1180×1300 unit(mm) |
|
10 |
Machine weight |
1T |
|
11 |
Same specification devide |
devide left hand(model:z)and right hand(model:Y)two operations |
|
12 |
Button heading operate time |
Each about 12-16S |
Button Heading Machine
Heading Machine,Button Heading Machine,Button Heading Making Machine,Concrete Bar Button Heading Machine
Jiangsu Haiheng Building-Materials Machinery Co.,Ltd , https://www.jshaiheng.com