Zys Good Performance Ceramic Dental Bearing S418/S93/PA

Model NO.: S418/S93/PA
Separated: Separated
Inner Diameter: 3.175mm
Outer Diameter: 5.97-7.5mm
Structure: Deep Groove
Accuracy Class: P4/P2
Sealing Type: Sealed or Not
Trademark: ZYS
Specification: high quality
Origin: Luoyang, Henan, China
Model NO.: S418/S93/PA
Separated: Separated
Inner Diameter: 3.175mm
Outer Diameter: 5.97-7.5mm
Structure: Deep Groove
Accuracy Class: P4/P2
Sealing Type: Sealed or Not
Trademark: ZYS
Specification: high quality
Origin: Luoyang, Henan, China
Introduction :
1, It is best that the interference fit between bearing bore and turbine shaft is under
    0.5um~1.5um. When putting burbine shaft into bearing 
bore, the pressure should be
    forced on the face of inner ring to avoide the damage of rollway and balls

2, After fitting the bearing into tubine shaft they should be clear and instilled special
    lubricant.(Ethanol must not be used )

3, After high steam sterilized the Dental High Speed Handpiece should be jetted some
    lubricant into the air inlet before used and so that bearing 
could be used longer time.

4, To keep operating stability,the proload spring stress of bearing should be controlled
    under 1.2±0.2N.

Zys Good Performance Ceramic Dental Bearing S418/S93/PA

Workshop :

Zys Good Performance Ceramic Dental Bearing S418/S93/PA

   

ZYS  Luoyang Bearing Science And Technology Co.,ltd.

ZYS Tenet: To lead the science and technology development of bearing industry and to          
                    improve the
world'sequipment level.
ZYS Spirit: To keep continuous improvement, to pursue brilliance.
ZYS Core values: Integrity, rigor, innovation, mutual benefit.
      ZYS was formerly known as Luoyang bearing research institute, which was founded in 1958 and was the only first-class comprehensive research institute in China bearing industry. As it became one member of China National Machinery Industry Corporation in 1999, the former institute was transformed into the science and technology enterprise. Then Luoyang Bearing Science & Technology Co., Ltd. was established in 2001. It was listed at Shenzhen Stock Exchange with stock code 002046 in 2005.
     ZYS  Advantage     
        ZYS has a strong strength of manufacturing high-precision and high-reliability bearings and relevant parts. ZYS company not only possesses advanced bearing manufacturing equipments and international first-class measuring instruments,but also has strong strength of manufacturing,inspecting and testing the high-precision and high-reliability bearings and relevant spare parts.In the meantime,it always keeps a leading position in bearing basic theory,lubrication technology,design,material,test,information criterion and other aspects.
             Glory              

Top 200 most promising companies of China in Forbes  

Top 500 in China Machinery Industry

Excellent Enterprise with China Well-know Trademark   

High-performance Bearings Laboratory

State Quality Supervision and Testing Center for Bearing

ISO/TC4 China Secretariat

The Research Center for High-speed Precision Bearing Engineering in Machinery Industry.


With our customers
Zys Good Performance Ceramic Dental Bearing S418/S93/PA


      We would like to and ready to do business with any company from all over the world.If any of ZYS products interests you or if you have interests in ZYS company,please don't hesitate to contact with us,we would like to give you ZYS best quality service any day any time !

 

   Contact us     

  Address: No.1 Jilin Road, Luoyang City, Henan, Province, China.

  Zip Code:471039

  Website: www.zysbearing.com

                                     OTHER HOT SALE PRODUCTS IN OUR COMPANY
High precision angular contact ball bearing                        Precision spindle bearing
Hybrid ceramic bearing                                                            Slewing bearing
Cylindrical roller bearing                                                          Needle roller bearing
Taper roller bearing                                                                  Precision lathe bearing
Bearing measuring instrument                                              YRT rotary table bearing
High-frequency spindles                                                          Dental drill bearing
Bearing ball                                                                                Bearing making machine
                                                                             etc.

Introduction :
1, It is best that the interference fit between bearing bore and turbine shaft is under
    0.5um~1.5um. When putting burbine shaft into bearing 
bore, the pressure should be
    forced on the face of inner ring to avoide the damage of rollway and balls

2, After fitting the bearing into tubine shaft they should be clear and instilled special
    lubricant.(Ethanol must not be used )

3, After high steam sterilized the Dental High Speed Handpiece should be jetted some
    lubricant into the air inlet before used and so that bearing 
could be used longer time.

4, To keep operating stability,the proload spring stress of bearing should be controlled
    under 1.2±0.2N.

Zys Good Performance Ceramic Dental Bearing S418/S93/PA

Workshop :

Zys Good Performance Ceramic Dental Bearing S418/S93/PA

   

ZYS  Luoyang Bearing Science And Technology Co.,ltd.

ZYS Tenet: To lead the science and technology development of bearing industry and to          
                    improve the
world'sequipment level.
ZYS Spirit: To keep continuous improvement, to pursue brilliance.
ZYS Core values: Integrity, rigor, innovation, mutual benefit.
      ZYS was formerly known as Luoyang bearing research institute, which was founded in 1958 and was the only first-class comprehensive research institute in China bearing industry. As it became one member of China National Machinery Industry Corporation in 1999, the former institute was transformed into the science and technology enterprise. Then Luoyang Bearing Science & Technology Co., Ltd. was established in 2001. It was listed at Shenzhen Stock Exchange with stock code 002046 in 2005.
     ZYS  Advantage     
        ZYS has a strong strength of manufacturing high-precision and high-reliability bearings and relevant parts. ZYS company not only possesses advanced bearing manufacturing equipments and international first-class measuring instruments,but also has strong strength of manufacturing,inspecting and testing the high-precision and high-reliability bearings and relevant spare parts.In the meantime,it always keeps a leading position in bearing basic theory,lubrication technology,design,material,test,information criterion and other aspects.
             Glory              

Top 200 most promising companies of China in Forbes  

Top 500 in China Machinery Industry

Excellent Enterprise with China Well-know Trademark   

High-performance Bearings Laboratory

State Quality Supervision and Testing Center for Bearing

ISO/TC4 China Secretariat

The Research Center for High-speed Precision Bearing Engineering in Machinery Industry.


With our customers
Zys Good Performance Ceramic Dental Bearing S418/S93/PA


      We would like to and ready to do business with any company from all over the world.If any of ZYS products interests you or if you have interests in ZYS company,please don't hesitate to contact with us,we would like to give you ZYS best quality service any day any time !

 

   Contact us     

  Address: No.1 Jilin Road, Luoyang City, Henan, Province, China.

  Zip Code:471039

  Website: www.zysbearing.com

                                     OTHER HOT SALE PRODUCTS IN OUR COMPANY
High precision angular contact ball bearing                        Precision spindle bearing
Hybrid ceramic bearing                                                            Slewing bearing
Cylindrical roller bearing                                                          Needle roller bearing
Taper roller bearing                                                                  Precision lathe bearing
Bearing measuring instrument                                              YRT rotary table bearing
High-frequency spindles                                                          Dental drill bearing
Bearing ball                                                                                Bearing making machine
                                                                             etc.

Silver Foil Label

Silver Foil Label,Silver Foil Sticker,Aluminum Foil Lable,Bright Silver Aluminum Foil Paper

SOONTOMAX (TAISHAN) LABEL MATERIAL CO.LTD , https://www.stmlabel.com