| material | Grade AÂ Â Wc-10 tungsten carbide alloy |
| Processing range | Inner diameter : φ16mm-φ450mm ,effective length to 9000mm |
| Processing technic | Centrifugal casting,alloy layer reach 1.5mm-2mm one side,maximum reach 3mm-6mm one side |
| Alloy powder composition | Wc(50%-60%),C,Si,Cr,B,Ni,Mo,Co,etc |
| The index of hardness | HRC62-65,the service life of 5-6 times longer than the nitrided one |
| Characteristics of alloy powder | High wearing resistance,high corrosion resistance and high temperature resistance |
| Apply to | Nylon plus 30% - 50% glass fiber, bakelite, magnetic powder, ceramic powder, aluminum magnesium powder, iron powder, LCP and halogen-free flame retardant plastic |
| material | Grade BÂ Ni-20 Ni-based alloy |
| Processing range | Inner diameter : φ16mm-φ450mm ,effective length to 9000mm |
| Processing technic | Centrifugal casting,alloy layer reach 1.5mm-2mm one side,maximum reach 3mm-6mm one side |
| Alloy powder composition | Ni,C,Si,Cr,B,Mo,Co,Wc(20%-25%),etc |
| The index of hardness | HRC60-63,the service life of 4-5 times longer than the nitrided one |
| Characteristics of alloy powder | High corrosion resistance,high wearing resistance and high temperature resistance |
| Apply to | PE, PC, PVC, LCP, acrylic, transparent plastic, halogen free flame retardant plastic, corrosion resistance of resin plastic, etc |
| material | Grade C Fe-30 Fe-based alloy |
| Processing range | Inner diameter : φ16mm-φ450mm ,effective length to 9000mm |
| Processing technic | Centrifugal casting,alloy layer reach 1.5mm-2mm one side,maximum reach 3mm-6mm one side |
| Alloy powder composition | Fe,C,Si,Cr,B,Mo,Ni, Co,etc |
| The index of hardness | HRC59-61,the service life of 3-5 times longer than the nitrided one |
| Characteristics of alloy powder | Wearing and corrosion resistance |
| Apply to | Nylon plus 10% -30% glass fiber, PC plus glass fiber, PVC plus calcium powder, recycled plastics processing, etc |
Product Display
Equipment Display
Processing
Packing&Delivery
Contact Us
Â
| material | Grade AÂ Â Wc-10 tungsten carbide alloy |
| Processing range | Inner diameter : φ16mm-φ450mm ,effective length to 9000mm |
| Processing technic | Centrifugal casting,alloy layer reach 1.5mm-2mm one side,maximum reach 3mm-6mm one side |
| Alloy powder composition | Wc(50%-60%),C,Si,Cr,B,Ni,Mo,Co,etc |
| The index of hardness | HRC62-65,the service life of 5-6 times longer than the nitrided one |
| Characteristics of alloy powder | High wearing resistance,high corrosion resistance and high temperature resistance |
| Apply to | Nylon plus 30% - 50% glass fiber, bakelite, magnetic powder, ceramic powder, aluminum magnesium powder, iron powder, LCP and halogen-free flame retardant plastic |
| material | Grade BÂ Ni-20 Ni-based alloy |
| Processing range | Inner diameter : φ16mm-φ450mm ,effective length to 9000mm |
| Processing technic | Centrifugal casting,alloy layer reach 1.5mm-2mm one side,maximum reach 3mm-6mm one side |
| Alloy powder composition | Ni,C,Si,Cr,B,Mo,Co,Wc(20%-25%),etc |
| The index of hardness | HRC60-63,the service life of 4-5 times longer than the nitrided one |
| Characteristics of alloy powder | High corrosion resistance,high wearing resistance and high temperature resistance |
| Apply to | PE, PC, PVC, LCP, acrylic, transparent plastic, halogen free flame retardant plastic, corrosion resistance of resin plastic, etc |
| material | Grade C Fe-30 Fe-based alloy |
| Processing range | Inner diameter : φ16mm-φ450mm ,effective length to 9000mm |
| Processing technic | Centrifugal casting,alloy layer reach 1.5mm-2mm one side,maximum reach 3mm-6mm one side |
| Alloy powder composition | Fe,C,Si,Cr,B,Mo,Ni, Co,etc |
| The index of hardness | HRC59-61,the service life of 3-5 times longer than the nitrided one |
| Characteristics of alloy powder | Wearing and corrosion resistance |
| Apply to | Nylon plus 10% -30% glass fiber, PC plus glass fiber, PVC plus calcium powder, recycled plastics processing, etc |
Product Display
Equipment Display
Processing
Packing&Delivery
Contact Us
Â
Steel Bar Reducing Diameter Machine
It belonging to no cutting processing equipment has the advantages of high production efficiency and stable quality. The whole body of cast iron is made of hydraulic technology. The part that needs to be reduced in diameter such as round steel and rebar is sent into a special grinding tool by cold compression molding. The density of the steel in the shrinkage part can be greatly improved, thereby improving the tensile strength of the material. The toughness and impact toughness are not reduced, so that the strength of the threaded part and the part of the rod are consistent, which solves the disadvantages of reducing the tensile force and impact toughness due to the peeling of the lathe, and is a special equipment for processing the anchor bolt, which can perfectly replace the lathe.
Necking Machine,Rebar Necking Machine,Steel Rebar Necking Machine,Steel Bar Reducing Diameter Machine
Borong Machinery Manufacturing CO. LTD , https://www.boronjx.com