1.More reasonable structure.
2.High E/R.H value.
3.Verg suitable for the large wharf.
4.Good energy absorption to reaction force ratio
5.Integrated and fully-embedded fender flanges make assembly & installation simple.
6.Large fender footprint with good force distribution could lead to relative light panel constuction.
7.Good shear force resistance due to the large diameter of the fender flangesuper cell rubber
Specification:
Â
| Specification | H (mm) |
ØW (mm) |
ØB (mm) |
D (mm) |
n x d (mm) |
| SC400H | 400 | 650 | 550 | 25 | 4*30 |
| SC500H | 500 | 650 | 550 | 25 | 4*32 |
| SC630H | 630 | 840 | 700 | 25 | 4*39 |
| SC800H | 800 | 1050 | 900 | 30 | 6*40 |
| SC1000H | 1000 | 1300 | 1100 | 35 | 6*47 |
| SC1150H | 1150 | 1500 | 1300 | 37 | 6*50 |
| SC1250H | 1250 | 1650 | 1450 | 40 | 6*53 |
| SC1450H | 1450 | 1850 | 1650 | 42 | 6*61 |
| SC1600H | 1600 | 2000 | 1800 | 45 | 8*61 |
| SC1700H | 1700 | 2100 | 1900 | 50 | 8*66 |
| SC2000H | 2000 | 2200 | 2000 | 50 | 8*74 |
| SC2250H | 2250 | 2550 | 2300 | 57 | 10*74 |
| SC2500H | 2500 | 2950 | 2700 | 70 | 10*74 |
| SC3000H | 3000 | 3350 | 3150 | 75 | 12*90 |
Applications:
1. Frontal berthing is fixed on frontal fender in an effort to alleviate stress acted upon sides of ship. According to specific demand, surface stress can drop to as low as 25t/m2. Thus, it is particularly suitable for berthing of large vessels.
2. Owing to high reaction force energy absorption per unit, it is can excellently meet the requirements of open sea wharf and dolphin type berth.
Â
Process:
The foil roll is introduced into the rubber roller of the feeding device via the decoiling machine and then would in the winding former after passing through the edge of the shearing machine and the roller wheel of the burr pressing device. The inter layer insulation coil is erected in the rear of the coiling optical shaft of the foil winding machine and wound in the winding former after sheared by the trimming roll and the shears blade.
Functional feature:
1. The device adopts and electrical servo deflection correction system to achieve manual/automatic adjustment of the foil position more conveniently and reliably.
2. An advanced electrical control technology of constant tension is adopted to control the tension of the foil and the inter layer insulation, with the features such as quantitive, accurate and convenient control of the tension no mechanical friction. The required tension can be maintained for forward winding, stop and backward winding, ensuring compact coils.
3. The inter layer insulation adopts a cantilever mechanism, convenient for feeding and the mechanism can be pulled out as a whole without guide rails outside the body.
4. Automatic welding mechanism and roll shearing mechanism adopt ball screws and linear guide rails for drive, ensuring the service life and accuracy of the device.
5. This device first adopts the all-in-one sing frame, solving problems such as few coil urns and deflection correction lag.
6. This device is a hi-tech product produced by combining with actual production on the basis of many similar products at home and abroad. The whole machine is controlled via an advanced PLC touch screen, with high automation level and simple and reliable operation, representing higher production level of domestic foil winding machines.
Cnc Winding Machine,Foil Winding Machine,Cnc Wire Winding Machine,Hv Foil Winding Machine
JINAN EURO-ASIA MACHINERY CO., LTD , https://www.euroasiamachine.com